Installation Notes for Softerra Adaxes 2009.1

This document contains requirements and instructions on how to install Softerra Adaxes 2009.1.

System Requirements | Installation | Uninstallation | Additional Components | How Do I

System Requirements

The tables below outline software and hardware requirements for installing and running the Softerra Adaxes components.

Supported Operating Systems

Adaxes Service Service Administration Console Web Interface*
  • Windows Server 2003 R2
  • Windows Server 2003, Standard Edition
  • Windows Server 2003, Enterprise Edition
  • Windows Server 2003, Enterprise Edition x64
  • Windows Server 2003, Datacenter Edition
  • Windows Server 2003, Datacenter Edition x64
  • Windows XP Professional SP1
  • Windows XP SP1 x64
  • Windows Server 2008
  • Windows Server 2008 x64
  • Windows 2000 SP4 (IE 6.0 or later is required)
  • Windows XP SP2
  • Windows XP SP2 x64
  • Windows Server 2003 SP1
  • Windows Server 2003 SP2 x64
  • Windows Vista
  • Windows Vista x64
  • Windows Server 2008
  • Windows Server 2008 x64
  • Windows 2000 SP3
  • Windows XP SP2
  • Windows XP x64
  • Windows Server 2003
  • Windows Server 2003 x64
  • Windows Vista
  • Windows Vista x64
  • Windows Server 2008
  • Windows Server 2008 x64

* It's highly recommended to install Web Interface on the server editions of Windows because when installed on workstations, IIS has a limitation on the number of simultaneous connections. In this case, the connection limit can be reached when only two or three persons are using the Web Interface at the same time.

Important: To install Softerra Adaxes, the target computer must be joined to an Active Directory domain.


Hardware Requirements

The minimum hardware required to install and run Softerra Adaxes components includes:

Adaxes Service Service Administration Console Web Interface
  • CPU: 1.6 GHz or higher recommended
  • RAM: 256 MB or more recommended
  • HDD: 512 MB
  • CPU: 1.1 GHz or higher recommended
  • RAM: 256 MB or more recommended
  • Super VGA (800x600) or higher resolution monitor
  • CPU: 1.6 GHz or higher recommended
  • RAM: 256 MB or more recommended

Note: Hardware requirements depend on the total number of objects managed by your Adaxes service.


Installation Prerequisites

Softerra Adaxes components require Microsoft .NET Framework 2.0 to be installed on the target system.
To install the framework, see How to install Microsoft .NET Framework 2.0.

top of page

Installation

Note: To install Softerra Adaxes, you must log on to your computer using an account that belongs to the local Administrators group.


Installation Instructions

To install Softerra Adaxes:

  1. Log on to the operating system under a user account that has local administrator permissions on the target computer and is a member of an Active Directory domain.
  2. Install Microsoft .NET Framework 2.0, if not installed. For details, see How to install Microsoft .NET Framework 2.0.
  3. Launch the Softerra Adaxes installation package (.msi) for the language and OS architecture you want.
    Note: All Softerra Adaxes components (Adaxes Service, Service Administration Console and Web Interface) are installed by a single MSI package.
  4. The Welcome screen appears. Read the information provided and click Next.
  5. Accept the license agreement and click Next.
  6. Select the Adaxes components you would like to install and click Next.
    Please note that different Adaxes components have different system and hardware requirements. For details, see System Requirements.
    If you select none of the Adaxes components, only the Softerra Adaxes ADSI provider is installed.
  7. If you have selected Adaxes Service, do the following:
  8. If you selected Web Interface, do the following:
  9. On the Ready to Install page, click Install to begin the installation.
    Depending on the features you've selected, the setup program may install additional components on your system. For details, see Additional Components.
Note:
During the installation you might be prompted to provide the Windows installation files. It might be necessary to install Windows components used by Softerra Adaxes (e.g. Web Interface requires Microsoft IIS that is a Windows component).
If the Insert Disk dialog box appears, use one of the following methods:
  • Insert your Windows CD-ROM into your CD-ROM or DVD-ROM drive, and then click OK.
  • Click OK to locate your Windows installation files. In the Files Needed dialog box, click Browse, locate your Windows installation files, and then click Open. For example, the installation files might be in the D:\I386 folder.

Rights Granted to Adaxes Service Logon Account

Since the Adaxes service uses the account of the default service administrator to log on to the system, the setup program grants the 'Log on as service' right to this account.

When the Adaxes service is installed on a workstation rather than on a domain controller, this right is granted locally on this workstation via the Local Policy settings. If there is a conflicting domain-based Group Policy object that grants the 'Log on as service' right to other users, the local right granted by the setup program will be removed during the Group Policy refresh, because the domain-based Group Policy settings override the Local Policy settings. If this happens, the Adaxes service will not start. In this case contact your domain administrator to grant the 'Log on as service' right to the account of the default service administrator in a precedent domain-based Group Policy.

top of page

Uninstallation

Note: Before uninstalling Adaxes Service you may want to backup its configuration. For this purpose, use the Softerra.Adaxes.BackupRestore.exe tool.

To uninstall Softerra Adaxes:

  1. If you want to uninstall the Adaxes Service, make sure that the service is running. It is necessary to correctly unregister the service from your system (remove the service connection points and clean up the configuration set metadata).
  2. Open Add or Remove Programs and select the Softerra Adaxes product.
  3. Click Remove and follow the steps provided.

top of page

Additional Components

Some of the Softerra Adaxes components require additional software to be installed in your operating system. All the additional software is installed automatically by the setup program, however you can do it manually if the automatic installation fails (the instructions are provided below).
The software components, the setup program is going to install, are listed on the Ready to Install page that is shown right before the installation process starts.

Additional software components installed automatically by the Adaxes setup program include:

Adaxes Service Service Administration Console Web Interface

Note: After Softerra Adaxes is uninstalled, the additional components installed automatically remain in the system.

top of page

How Do I

Install Microsoft .NET Framework 2.0

x86 platform:

  1. Visit http://go.microsoft.com/fwlink/?linkid=56645.
  2. Follow the instructions to download and install Microsoft .NET Framework Version 2.0 Redistributable Package (x86).

x64 platform:

  1. Visit http://go.microsoft.com/fwlink/?linkid=67693.
  2. Follow the instructions to download and install Microsoft .NET Framework Version 2.0 Redistributable Package (x64).

Grant Permissions to Publish Adaxes Service

  1. Open Active Directory Users and Computers on a domain controller.
  2. Connect to the domain of the target computer (the computer on which you want to install Softerra Adaxes).
  3. On the View menu, select Advanced Features.
  4. Right-click the computer object, on which you want to install Softerra Adaxes, and then click Properties.
  5. On the Security tab, click Add and type the name of the user whom you want to grant the permissions to and then click OK.
  6. Select the Allow check boxes for the Create All Child Objects and Delete All Child Objects permissions.
  7. Click OK.

Install Microsoft Active Directory Application Mode (ADAM) SP1

To install ADAM, you must log on to your computer using an account that belongs to the local Administrators group.

To install ADAM on Windows Server 2003 or Windows XP:

  1. Visit http://www.microsoft.com/downloads/details.aspx?familyid=9688f8b9-1034-4ef6-a3e5-2a2a57b5c8e4.
  2. Follow the instructions to download and install Microsoft Active Directory Application Mode (ADAM) SP1.

To install ADAM on Windows Server 2003 R2:

  1. Log on as an administrator, click Start, point to Control Panel, and then click Add or Remove Programs.
  2. Click Add/Remove Windows Components.
  3. In the Components list, select the check box next to Active Directory Services, and then click Details.
  4. Select the check box next to Active Directory Application Mode (ADAM), click OK, and then click Next.
  5. Review the message that appears. Based on the contents of message, do one of the following:

Install Microsoft Active Directory Lightweight Directory Services Server Role

To install AD LDS, you must log on to your computer using an account that belongs to the local Administrators group.

To install the AD LDS server role on Windows Server 2008:

  1. Log on as an administrator, click Start, and then click Server Manager.
  2. In the console tree, right-click Roles, and then click Add Roles.
  3. Review the information on the Before You Begin page of the Add Roles Wizard, and then click Next.
  4. On the Select Server Roles page, in the Roles list, select the Active Directory Lightweight Directory Services check box, and click Next.
  5. Finish adding the AD LDS server role by following the instructions in the wizard.

Install Microsoft Core XML Services (MSXML) 6.0

  1. Visit http://www.microsoft.com/downloads/details.aspx?FamilyID=d21c292c-368b-4ce1-9dab-3e9827b70604.
  2. Follow the instructions to download and install Microsoft Core XML Services (MSXML) 6.0.

Install Microsoft Internet Information Services (IIS) components

To install Microsoft IIS on Windows Server 2003:

  1. Log on as an administrator, click Start, point to Control Panel, and then click Add or Remove Programs.
  2. Click Add/Remove Windows Components.
  3. In the Components list, select the Application Server check box, and then click Details.
  4. Select the Internet Information Services (IIS) check box, and then click Details.
  5. Select World Wide Web Service, and then select the check box.
  6. Click OK two times to return to the Components list, and then click Next.
  7. Click Finish when the IIS service is installed.

To install Microsoft IIS on Windows XP:

  1. Log on as an administrator, click Start, point to Control Panel, and then click Add or Remove Programs.
  2. Click Add/Remove Windows Components.
  3. In the Components list, select the Internet Information Services (IIS) check box, and then click Details.
  4. Select World Wide Web Service, and then select the check box.
  5. Click OK two times to return to the Components list, and then click Next.
  6. Click Finish when the IIS service is installed.

To install Microsoft IIS server role on Windows Server 2008:

  1. Log on as an administrator, click Start, point to Administrative Tools, and then click Server Manager.
  2. In the console tree, right-click Roles, and then click Add Roles.
  3. Review the information on the Before You Begin page of the Add Roles Wizard, and then click Next.
  4. On the Select Server Roles page, in the Roles list, select the Web Server (IIS) check box, and then click Next.
  5. Review the information on the Web Server (IIS) page of the Add Roles Wizard, and then click Next.
  6. On the Select Role Services page, select the ASP.NET check box.
  7. Finish adding the Web Server role by following the instructions in the wizard.

Install Microsoft ASP.NET AJAX Extensions 1.0

  1. Visit http://www.microsoft.com/downloads/details.aspx?FamilyID=ca9d90fa-e8c9-42e3-aa19-08e2c027f5d6.
  2. Follow the instructions to download and install Microsoft ASP.NET AJAX Extensions 1.0.

top of page


Copyright © 2009-2010 Softerra, Ltd. All Rights Reserved